Truck/Trailer Flooring

Simpoh offers truck and trailer flooring in various wood profiles of highest quality. Our flooring profiles range from Tongue and Grove (TnG), Shiplap, Pencil Edge, Baton, Surface 4 Sides (S4S), E4E, rough sawn to any other custom wood profiles of our customers’ choice. These flooring are normally in form of solid wood, but also available in form of laminated finger-joint wood. We seek to utilise our expertise in hardwood products to offer our business partners with the best solutions.

Our truck and trailer flooring are available in various species of tropical hardwood, such as Apitong, Balau, Kapur, Keranji, Kekatong, Merbau and other Malaysian hardwoods. These Malaysian hardwoods are well-known  its proven strength and durability. 

Simpoh manufacture truck flooring in form of moulded wood profiles in any specific sizes or measurements. Some of the most common wood profiles are as follows:

Shiplap:

Shiplap profile has wooden siding rabbets so that the edge of one board overlaps the one next to it in a flush joint. 

 

Size
Length
Profile
Siding
1 1/8" x 5" -  8"
8 to 22 ft
Shiplap
3/8" or 1/2" Lap
1 1/8" x 5 3/4"
8 to 20 ft
Shiplap
3/8" or 1/2" Lap
1 5/16" x 7"
8 to 22 ft
Shiplap w/ Crusher bead
3/8" or 1/2" Lap
1 3/8" x 5" - 8"
8 to 22 ft
shiplap
3/8" or 1/2" Lap
1 1/4" x 5" or 7"
8 to 22 ft
shiplap
3/8" or 1/2" Lap
1 5/8 x 6" or 8"
8 to 22 ft
shiplap
3/8" or 1/2" Lap

 

 

 

Tounge & Groove (TnG):

Tongue & Groove is a joint made by fitting a tongue on the edge of a board into a matching groove on another board. Its design enables stronger and non-slippery jaw action while eliminates nut and bolt failures.

 

Size
Length
Profile
Siding
 7/8" x 7 1/4"
8 to 22 ft
T&G
1/4" TnG
1 1/8" x 5" - 8"
8 to 22 ft
T&G
1/4" TnG
1 3/8" x 5" - 8"
8 to 22 ft
T&G
1/4" TnG
1 5/8 x 6" or 8"
8 to 22 ft
T&G
1/4" TnG

 

 

Side-Four-Side (S4S) / Edge-Four-Edge (E4E):

S4S profile are made from timbers dressed by moulder to give a smooth surface on four sides. All corners of E4E profile come with rounded edges with 4 sides are planned to give a smooth surface.

Size
Length
Profile
     
3/4" x 5 1/4"
8 to 22 ft
Tie slats
3/4" x 2 5/8"
8 to 22 ft
Bullnose slats
1-1/2 x 7 3/4
8 to 22 ft
S4S / E4E
1-3/8 X 7.08
8 to 22 ft
S4S / E4E
2-1/4 X 5 7/8
8 to 22 ft
S4S / E4E
2-1/4 X 6 1/4
8 to 22 ft
S4S / E4E
2 X 5
8 to 22 ft
S4S / E4E

 

 

Rough Sawn Timber:

Rough Sawn Timber  is sawn timber that is cutted into specific size but not dressed by moulder.  Therefore, its surfaces is slightly rougher than dressed wood profile such as S4S, E4E or TnG.

Size
Length
2"  x  6"
8ft & Up
2"  x  8"
8ft & Up
2"  x  12"
8ft & Up
3"  x  12"
8ft & Up
4"  x  12"
8ft & Up

 

 

Customised Moulded Wood Profile:

We welcome enquiry for truck flooring in customised wood profiles.  Our well-equiped moulding plants and experienced workforce enables us to manufacture trucks and trailer flooring in customised wood profiles designed by our customers.  Kindly send in drawing and let us utilise our expertise to offer you the best solutions.